Added features in version 9.98

• Possibility to move IP point in Profile and Sections mode with two new buttons named as “y,sp” and “y,ss” based on elevation of point and one of the predecessor or successor slopes

• Possibility to display elevation difference of project and ground along the route in Profile and Sections mode
• Possibility to control visible columns in Displaying Results mode, and also selecting items for exporting to Microsoft Excel in Displaying Results mode with the help of new “Results Settings” dialog box

• Possibility to calculate extra width required for horizontal arcs automatically based on Standards no. 415, basic design speed, radius and also design vehicle
• Direct access to Optionals Sections Information dialog box in normal mode and Profile and Sections mode

• A new bridge type named as Underpass is added and possibility to define span length (width) for Underpass and Overpass bridge types

• A new tunnel type named as Tunnel Type V in cross section shapes
• Possibility to have elevation difference between ground and subgrade instead of ground and project in longitudinal profile shape both when displaying in Profile and Sections mode and in printing

• Possibility to sketch route’s plan (horizontal alignment) in Automatic Plan based on different output scales of 1:500, 1:1000, 1:2000, 1:5000, 1:10000, 1:25000 and 1:50000, and adjusting text sizes accordingly by using new “Automatic Plan Text Sizes” dialog box for specifying text sizes for “IP Legends”, “Route Stationings”, “Kilometers”, “Hectometers”, “AutoText$$”, and “Azimuth, Lengths” items

• Grouping different texts in Automatic Plan based on the scale used
• Possibility to make visible or invisible objects drawn with different scales using new “Scaled Plot” check boxes in Plan mode

Added features in version 9.99

• Sight obstruction checking at edges in cross sections with regarding to horizontal curves, eye height, design speed and project lines grades
• Analysis and calculations of edge cuttings in cross sections due to sight obstruction checkings
• Displaying of passing forbidden regions in both longitudinal profile and cross sections
  

• Displaying of edge cutting regions due to sight obstruction checkings both in longitudinal profile and cross sections

• Displaying of edge cutting values required due to sight obstruction at every point along longitudinal profile

• Printing of passing forbidden regions and edge cutting regions and required values at every cross section

• Applying edge cuttings for cross sections in excavation condition using the simplest technique by assigning a first berm with a negative width value
  

• Applying edge cuttings for cross sections in embankment condition using URSD merging technique

• New considerations for pavement design standards 234e1
• Possibility to use new axial load equivalent factors recommended in new pavement design standards
  

• Possibility to use new formulas presented for calculating a1, a2 and a3 values in pavement design
• Possibility to use new formula given for calculating SN parameter

• Possiblity to design and drawing of a variety of serpentine curves including Symmetrical, Assymmetrical, Full serpentine and Half serpentine